Nylon Carpet Tiles 50x50cm Commercial Basement Peel and Stick Modular

This BGL07 Series anti-static nylon carpet tile is a 50×50 cm modular carpet square built for buyers who want a commercial-grade floor that is easy to live with and simple to combine into their own layout. The face is tufted from 100% nylon Multi-Level Loop yarn at a dense 1/12" gauge and a 550 g/m² pile weight, on a 6.0 mm ± 0.2 mm body with a POE (polyolefin) backing. In everyday language that means a tight, hard-wearing loop-pile surface that copes with footfall, rolling chairs and trolleys, stays clean with routine care, and can be lifted and re-laid one square at a time.

For customers in Canada searching for basement carpet tiles, peel and stick carpet tiles or commercial carpet squares, this tile answers the three things that matter most: a surface that does not build up static, a floor that is easy to maintain, and a price that stays sensible over its whole life. For customers across Southeast Asia — Malaysia, Singapore, Thailand, Vietnam, Indonesia and the Philippines — looking for nylon carpet tiles, modular carpet tiles, office carpet or hotel carpet, the same design brings tropical-climate practicality: moisture-tolerant construction, easy cleaning, and a modular format that keeps renovation cost and downtime low.

The tile is available in a choice of patterns and colours and can be installed in brick or quarter-turn layouts, so a floor can be built up and changed over time without re-covering an entire room. Whether the requirement is a set of anti-static floor mats for a server area, a nylon floor mat for a workshop, or a full modular carpet tile floor for an office, hotel lobby or basement, this product is designed to be combined, repaired and renewed piece by piece.

The figures below describe the standard BGL07 Series tile. Colours, patterns and performance options can be confirmed against a specific project brief.

The core function of this tile is to provide a hard-wearing, low-maintenance floor that also controls static — a combination that matters in offices full of electronics, in workshops and server rooms, and in homes and basements where a comfortable, easy-clean surface is wanted. The anti-static performance (< 2.0 kV, AATCC TM 134) helps reduce the build-up and discharge of static electricity, protecting sensitive equipment and making the floor more comfortable to walk on. The tight multi-level loop resists flattening and fraying, while the anti-fouling and antibacterial finish keeps spills near the surface for quick cleaning. And because the tiles are 50×50 cm squares, they can be combined freely to suit any room, replaced individually when needed, and re-arranged as a layout changes.

This makes the product a natural fit across two very different but high-demand regions. In Canada, where basements, home offices, retail units and commercial fit-outs drive demand for basement carpet tiles, peel and stick carpet tiles and commercial carpet squares, the tile offers a practical, value-led solution that a home owner or a contractor can install and maintain without specialist help. In Southeast Asia, where humid conditions and heavy foot traffic place a premium on easy cleaning and durable construction, it suits office carpet, hotel carpet, retail and showroom flooring, modular carpet tiles and anti-static floor mats for equipment zones.

The everyday benefits land in familiar ways:

• Offices and open workspaces. A quiet, anti-static carpet tile that handles rolling chairs and daily footfall while keeping the floor looking uniform.
• Server rooms and electronics zones. Controlled static dissipation reduces the risk of static discharge around sensitive equipment, while modular tiles allow a single damaged square to be swapped quickly.
• Basements and home offices (Canada). Warmer and more comfortable than hard flooring, easy to vacuum, and simple to combine or replace in a do-it-yourself layout.
• Hotels, lobbies and retail floors (Southeast Asia). A durable, easy-clean surface that stands up to heavy traffic and humid conditions, with modular replacement to keep renovation costs low.
• Schools, clinics and waiting areas. An antibacterial, low-maintenance floor for shared spaces that must stay hygienic and calm.

Four benefits define this tile: it is anti-static, it is easy to care for, it offers high value for money, and it can be combined freely into any layout. Everything else in the specification is there to support those strengths over a long service life.

Together, these advantages add up to a floor that protects equipment, cleans easily and stays affordable to own:

• Static control that protects electronics and improves walking comfort.
• Effortless upkeep from the anti-fouling and antibacterial surface.
• Low total cost of ownership through modular replacement and simple maintenance.
• Free combination and re-configuration with 50×50 cm squares and multiple laying patterns.
• Durable, colour-fast performance for years of heavy use.
• Compliance confidence with Class B1 flame retardancy and SGS certification.

The tile is a modular square, so it can be laid in straightforward or more decorative patterns depending on the look required. Two common options are brick (offset) and quarter-turn, both of which distribute wear and help conceal seams; the tiles can also be combined with other squares to create zoning or a mixed layout. Because each tile is 50×50 cm, installation is quick and a single tile can be replaced later without touching the rest of the floor.

Keeping this anti-static carpet tile in good condition takes very little effort. Vacuum regularly to remove dry soil before it works into the pile, and deal with spills straight away by blotting rather than rubbing. The anti-fouling treatment makes most everyday marks easy to remove, and the antibacterial finish supports a clean, hygienic surface — helpful in humid Southeast Asian climates where cleanliness and drying time matter.

To make the product easy to find, the tile is described using the terms buyers in Canada and Southeast Asia most often use when searching for nylon carpet and modular flooring. If you arrived here through one of these searches, this is the tile for you.

A floor is judged by how it performs after months of use, not on the day it is laid. This tile is engineered so the things buyers value most — static control, easy maintenance, value for money and the freedom to combine tiles their own way — are built in from the start. A tight, durable nylon loop keeps the floor looking good under heavy use; an anti-fouling, antibacterial surface keeps it clean and hygienic; anti-static performance protects equipment; and the 50×50 cm modular square keeps repair and reconfiguration simple and affordable. For offices, hotels, retail spaces, basements and equipment zones alike, the result is a dependable floor with a predictable, competitive total cost of ownership.

The tile delivers controlled static dissipation below 2.0 kV (AATCC TM 134), which helps reduce static build-up and discharge. This makes it suitable for offices, server rooms and equipment zones where electronics need protection.

The tight multi-level loop and anti-fouling, antibacterial finish keep dirt and spills near the surface. Routine vacuuming handles dry soil, and most spills can be blotted away, so the floor stays presentable with minimal effort.

Yes. The modular 50×50 cm squares can be laid in brick or quarter-turn patterns and combined to suit any room. Tiles can also be bought in the quantity you need, so you only cover the area you want.

Yes. Because the tiles are modular, one marked or worn square can be lifted and replaced on its own, keeping repairs quick and economical without re-covering the whole floor.

Yes, and it is popular for that use in Canada. A comfortable, easy-clean surface with the option of peel-and-stick or modular laying makes it a practical choice for basements and home offices.

The moisture-tolerant construction, easy cleaning and durable loop pile suit humid climates and heavy foot traffic, making the tile a good fit for offices, hotels and retail spaces across the region.

The tile passes ASTM E 648 Class B1 for flame retardancy and ASTM E 662 for smoke density, supporting commercial fire-safety expectations. Project-specific documentation can be provided on request.

We welcome enquiries from buyers, distributors and project teams in Canada and across Southeast Asia, for orders of any size. Contact us to request a sample, confirm colours or laying pattern, or obtain a quotation.

• Free design consultation
• Custom logo and colour options
• Project-based quotation

Send us your room dimensions, preferred colour and expected quantity, and we will recommend the most suitable tile, backing and delivery schedule for your project.